Someone recently asked me where I got my inspiration from. The best answer I could give was "Anything and everything. I never know when it will hit and what will trigger an idea until it comes to me." That's the way it works for me. As Thomas Edison said of Genius, as the light bulb went on above his head, it's 1% inspiration, 99% perspiration.
I find that when the inspiration comes, the initial idea can be sketched out as a first draft in a few minutes. After that comes the blood, sweat and tears. I know where I am, and I know what I want to achieve, but once I get the image it can take hours to draw a final version which I think meets my idea.
Then I have a drawing. Keep going, there are still the threads and stitches to select. Usually I have already decided on colours, but then there's the colour balance to be considered. Once I have the drawing, the colours balanced in my mind, and the stitches applied to areas, I can then translate the drawing into a chart. What about size? Mostly, I find, I don't have to think too much about that as the design will tend to indicate what size the finished piece should be.
What about the Polar Bear?
Then I have a drawing. Keep going, there are still the threads and stitches to select. Usually I have already decided on colours, but then there's the colour balance to be considered. Once I have the drawing, the colours balanced in my mind, and the stitches applied to areas, I can then translate the drawing into a chart. What about size? Mostly, I find, I don't have to think too much about that as the design will tend to indicate what size the finished piece should be.
What about the Polar Bear?
I did promise one in the title, so here is my Polar Bear:
The inspiration came from a previous quilt, "6 Bears +1", which had a Bear's Claw pattern round the border. "You could do something with that in Needlepoint," I thought.
The initial sketch was a single Bear's Claw, like the quilt. The next version extended it to four paws reducing in size, with a partial border, as though it was the corner of a quilt.
For this piece, the title came next. (Polar) Bear's Claw. Why Polar Bear? Who knows, I just decided Polar Bear, maybe because Polar Bears, like male embroiderers, are an endangered species.
It was the title which decided the colours I would use. Obviously, Polar Bears are white(ish) so there was a predominance of off-white, The live on ice floes and the floes are surrounded by the sea, so the sea had to be a dark blue, the ice a pale blue.
Jings! What next? The Stitches. The paws, being the obvious large areas, needed to be white and suggest a certain furriness so I used a woven stitch to give them bulk. When it came to charting them I decided that the size of the woven stitch should remain the same for each 'paw print' and only the area of the 'paw print' should reduce. I also decided that the claws should be couched Kreinik silver. Why? It just felt right.
As this was based on a quilt pattern I looked for a stitch that had a woven-fabric quality to it for the background. If you don't know this one, it's called Darmstadt Stitch and it's dead easy. It also covers the area at quite a rate once you get in the swing of it.
Having in my mind already decided that the sea would be the border, or was it that the border would be the sea, I sought something smaller and tighter than the Darmstadt and went for a Scotch Stitch with a zig-zag in the same off white as the paws. I deliberately left the ends 'hanging' to imply that this was a corner of a quilt.
It took some time to balance the stitch sizes to the drawing and chart the final design, but by taking the time to count it all out on graph paper, it does mean that the chart is a close reflection of the finished article. I say close, because there is almost always that point where a stitch, as charted, really just doesn't look right and you have to wing it. All you've got to do next is stitch it.
I have to admit that this is one of the few pieces I have designed where I haven't made some fairly major alterations to the stitch plan just because what looks good on paper doesn't work on canvas.
(Polar) Bear's Claw is 5" square and was mounted in a 12" square cold steel frame with a pale grey mount. I used Soie d'Ager silks and a Kreinik metallic silver throughout. It took me 50 hours to design and stitch. (Polar) Bear's Claw was exhibited at the American Needlepoint Guild Seminar 2015.
The last thing I stitched was a two row border that matched the mounting board. I like to add a tent stitch 'framer's friend' to all my needlepoint. My framer says that it gives a smoother transition between the embroidery and the canvas and makes for a better looking mount, I do it because if the mount is just slightly off, the framers friend can disguise it.
And breathe.
No comments:
Post a Comment